Edit - Applications - DataConnect

You are here: 1. Distribution System > 1.10. MAINTENANCE Menu: System Maintenance > 1.10.2. Maintenance - Edit Company > 1.10.2.26. Edit Company - Edit - Applications > Edit - Applications - DataConnect

Edit - Applications - DataConnect

Data.Connect is a Micronet module that automatically runs various Micronet processes. A typical function of Data.Connect is to email and perform operations based on the user ID setup. In most companies, Data.Connect is setup to run as a service. A company may have several different Data.Connect services.

You use this option to set your general Data.Connect options such as how often Data.Connect runs.

Select a company to edit.

Refer to "Selecting a Company to Edit".

Select EDIT | APPLICATIONS | DATACONNECT | GENERAL.

Micronet displays the Data Connect General Configuration screen.

Complete the following fields:

	Field	Value
	Company Number	Micronet displays the ID of the company you are logged in under.
	Company Name	Micronet displays the company name.
	Time Interval	Enter the frequency at which you want Data.Connect to scan Micronet. For example, if you enter 10 and select Minutes, Data.Connect will scan Micronet every 10 minutes.
	Start Time
	Operating Mode	Select the mode in which you want Data.Connect to run: Polling – you should select this mode if you are running Micronet Mobile Applications Logged

Select the Ok button.

Micronet redisplays the Change Existing Company screen.

Select FILE | SAVE.